We have an error code that reads Valve Failure/ System Down/ or Check PS

First thing to try is a system reboot, to do so, press and hold the down arrow key on the control panel. Hold it down for about 10 seconds. It will beep, keep holding until the beeping stops, then release. The valve should rotate to clear the message

If No Rotation, or the message doesn't change it may be time to change the 12 volt 5 amp hour battery.

After replacing the FloLogic System battery, press and hold the down arrow key on the control panel. Hold it down for about 10 seconds. It will beep, keep holding until the beeping stops, then release. The valve should rotate to clear the message.